| Zahlungsart: | T/T |
| Incoterm: | EXW |
| Minimum der Bestellmenge: | 1 Bag/Bags |
| Transport: | Air |
| Hafen: | Beijing,Shenzhen,Hong Kong |
Modell: MSL-III/FN/F/S/DS/RA/R-532
Marke: CNI
Operating Mode: Cw
Spectral Linewidth (nm): <0.00001
Output Power: 1mw-5w
Herkunftsort: China
Status: Neu
Garantiezeit: 1 Jahr
Mechanischer Prüfbericht: Unter der Voraussetzung
Hauptverkaufsargument: Leicht zu bedienen
Features: Compact Design, High Resolution
| Verkaufseinheiten | : | Bag/Bags |
| Pakettyp | : | Statische freie Plastiktüte und Karton, Schutzpackung |
| Bildbeispiel | : |
|
CNI hat das Raman -Spektrometer mit den Merkmalen des kompakten Designs, hoher Auflösung, hoher Empfindlichkeit, einfacher Messung und Betrieb, das alte Spektrophotometer ersetzen und in der chemischen und biologischen Forschung, Umweltwissenschaft, Schmuckbewertung, forensische Beurteilung, Lebensmittel-/Arzneimittelsicherheitsinspektion, ersetzen, die häufig verwendet werden , geologische Erkundung und viele andere Bereiche
532nm Single Longitudinal Mode Green -Laser für Raman -Anwendung wird Merkmale von ultra -kompakten, langen Lebensdauer, niedrigen Kosten und einfachen Betriebsgeräten hergestellt. In Raman -Spektrocopie, DNA , Holographie, Physik -Experiment usw.
Zuschauer:
| Model | MSL-III-532 | MSL-FN-532 | MSL-F-532 |
|
Wavelength (nm) |
532±2 |
532±1 |
532±1 |
|
Operating mode |
CW | ||
|
Output power (mW) |
>1, 5, 10, 20, - , 100 |
>1, 5, 10, 20, - , 400 |
>400, 600, - , 700 |
|
Power stability (rms, over 4 hours) |
<1%, <2%, <3% |
<1%, <2%, <3%, |
<1%, <2%, <3%, <5% |
|
Transverse mode |
TEM00 | ||
|
Longitudinal mode |
Single | ||
|
Spectral linewidth (nm) |
<0.00001 | ||
|
Coherent length (m) |
>50 | ||
|
Noise of amplitude (rms, 1Hz~20MHz) |
<0.5% |
<0.5% |
<1%, typical<0.5% |
|
M2 factor |
<1.2(<1.1 optional) |
<1.2(<1.1 optional) |
<1.5 |
|
Beam diameter at the aperture (1/e2 , mm) |
<1.5 | <1.5 | <2.5 |
|
Beam divergence, full angle (mrad) |
<1.2 | ||
|
Polarization ratio |
|
>100:1, Vertical±5 degree (Horizontal Optional) |
|
|
Warm-up time (minutes) |
<10 | ||
|
Pointing stability after warm-up (mrad) |
<0.05 | ||
|
Beam height from base plate (mm) |
24.8 | 27.4 | 45 |
|
Operating temperature (℃) |
15-35 | ||
|
Power supply (90-264VAC) |
PSU-III-FDA | PSU-H-FDA | PSU-H-FDA |
|
Expected lifetime (hours) |
10000 | ||
|
Warranty |
1 YEAR | ||
| Model | MSL-S-532 | MSL-DS-532 |
|
Wavelength (nm) |
532±2 | 532±1 |
|
Operating mode |
CW | |
|
Output power (mW) |
>1,5,10,20,-,50 |
>1,5,10,20,-,100 |
|
Power stability (rms, over 4 hours) |
<1%,<2%,<3% |
|
|
Transverse mode |
TEM00 |
|
|
Longitudinal mode |
Single |
|
|
Spectral linewidth (nm) |
<0.00001 | |
|
Coherent length (m) |
>50 | |
|
Noise of amplitude (rms, 20Hz~20MHz) |
<0.5% | |
|
M 2 factor |
<1.2(<1.1 optional) |
|
|
Beam diameter at the aperture( 1/e2 ,mm) |
0.7±0.05 |
|
|
Beam divergence, full angle (mrad) |
<1.5 | |
|
Polarization ratio |
>100:1 Horizontal±5 degree (Vertical Optional) |
|
|
Pointing stability after warm-up (mrad) |
<0.05 | |
|
Pointing stability Over Temp. (µrad/°C) |
<8 | |
|
Warm-up time (minutes) |
<5 | |
|
Beam height from base plate (mm) |
19 | |
|
Power Consumption(W) |
<30 | <6 |
|
Fiber |
|
Multimode/ Single Mode |
|
Shock Tolerance(6ms) |
7g laterally,15g vertically |
|
|
IP Rating |
IP67 ,IP65 |
|
|
Power supply(90-264VAC) |
PSU-H-FDA ,PSU-A-F |
5V DC (Photoelectric integrated) |
|
Operating temperature (℃) |
0-60 | 15-35 |
|
Max. Heat Dissipation of Head(W) |
10W@50℃,4W@25℃ |
|
|
Storage temperature (℃) |
|
5-50 |
|
Modulation |
Modulation isn`t available. |
|
|
Expected lifetime (hours) |
10000 | |
|
Warranty |
1 YEAR | |
| Model | MSL-RA-532 | MSL-R-532 |
|
Wavelength (nm) |
532±1 | |
|
Operating mode |
CW | |
|
Output power (W) |
>1, 1.1, 1.2, - , 2 |
>1,2...5 |
|
Power stability (rms, over 4 hours) |
<1%, <2%, <3% |
<1%,<2%,<3%,<5% |
|
Transverse mode |
TEM00 |
|
|
Longitudinal mode |
Single |
|
|
Spectral linewidth (nm) |
<0.00001 | |
|
Coherent length (m) |
>50 |
|
|
Noise of amplitude (rms, 1Hz~20MHz) |
<1% | |
|
Beam diameter at the aperture (1/e 2 , mm) |
<2 | ~1.5 |
|
Beam divergence, full angle (mrad) |
<1.2 | <1.5 |
|
M2 factor |
<1.2 | |
|
Warm-up time (minutes) |
<10 | <20 |
|
Pointing stability after warm-up (mrad) |
<0.05 | |
|
Beam height from base plate (mm) |
51 | 59 |
|
Cooled method |
|
Water cooled |
|
Operating temperature (℃) |
20-30 | |
|
Power supply (90-264VAC) |
PSU-H-FDA | PSU-W-FDA |
|
Expected lifetime (hours) |
10000 | |
|
Warranty |
1 YEAR | |
Copmpany -Informationen
Changchun New Industries (CNI), Foun Ded im Jahr 1996 in Changchun, China, ist Hersteller von Festkörper- und Diodenlasersystemen. CNI verfügt über einen verantwortlichen und zuverlässigen Service sowie Qualitätsprodukte mit kompaktem Design, hoher Zuverlässigkeit und hervorragender Leistung. Die Produkte werden häufig für wissenschaftliche Forschungen, Ausrüstungsherstellung, biomedizinisches Experiment, Präzisionsmessung, Unterhaltung, Radarkommunikation, Materialverarbeitung, Prozesskontrolle, Online -Erkennung, Untersuchungsgeräte und andere Bereiche verwendet.
Ausstellungen
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
Fill in more information so that we can get in touch with you faster
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
Contact Now